Advertisement
UK markets closed
  • NIKKEI 225

    40,074.69
    +443.63 (+1.12%)
     
  • HANG SENG

    17,769.14
    +50.53 (+0.29%)
     
  • CRUDE OIL

    83.05
    -0.33 (-0.40%)
     
  • GOLD FUTURES

    2,339.50
    +0.60 (+0.03%)
     
  • DOW

    39,331.85
    +162.33 (+0.41%)
     
  • Bitcoin GBP

    48,792.03
    -1,089.80 (-2.18%)
     
  • CMC Crypto 200

    1,331.63
    -12.88 (-0.96%)
     
  • NASDAQ Composite

    18,028.76
    +149.46 (+0.84%)
     
  • UK FTSE All Share

    4,429.66
    -21.82 (-0.49%)
     

Credo Technology Group Holding Ltd (NASDAQ:CRDO) Q2 2024 Earnings Call Transcript

Credo Technology Group Holding Ltd (NASDAQ:CRDO) Q2 2024 Earnings Call Transcript November 29, 2023

Credo Technology Group Holding Ltd reports earnings inline with expectations. Reported EPS is $0.01 EPS, expectations were $0.01.

Operator: Ladies and gentlemen, thank you for standing by. At this time, all participants are in a listen-only mode. Later, we will conduct a question-and-answer session. [Operator Instructions] I would now like to turn the conference over to Dan O'Neil, please go ahead, sir.

Dan O'Neil: Good afternoon and thank you all for joining us on our fiscal 2024 second quarter earnings call. Today I am joined by Credo's Chief Executive Officer, Bill Brennan; and Chief Financial Officer, Dan Fleming. I'd like to remind everyone that certain comments made in this call today may include forward-looking statements regarding expected future financial results, strategies and plans, future operations, the markets in which we operate, and other areas of discussion. These forward-looking statements are subject to risks and uncertainties that are discussed in detail in our documents filed with the SEC. It's not possible for the company's management to predict all risks nor can the company assess the impact of all factors on its business or the extent to which any factor or combination of factors may cause actual results to differ materially from those contained in any forward-looking statement.

ADVERTISEMENT

Given these risks, uncertainties, and assumptions the forward-looking events discussed during this call may not occur and actual results could differ materially and adversely from those anticipated or implied. The company undertakes no obligation to publicly update forward-looking statements for any reason after the date of this call to conform these statements to actual results or to changes in the company's expectations except as required by law. Also during this call, we will refer to certain non-GAAP financial measures, which we consider to be important measures of the company's performance. These non-GAAP financial measures are provided in addition to and not as a substitute for or superior to financial performance prepared in accordance with US GAAP.

A discussion of why we use non-GAAP financial measures and how reconciliations between our GAAP and non-GAAP financial measures is available in the earnings release we issued today, which can be accessed using the Investor Relations portion of our website. I will now turn the call over to our CEO. Bill?

Bill Brennan: Thank you, Dan. Welcome to everyone joining our Q2 fiscal 2024 earnings call. I'll start with an overview of our fiscal Q2 results. I'll then discuss our views on our outlook. After my remarks, our CFO, Dan Fleming, will provide a detailed review of our Q2 financial results and share the outlook for the third fiscal quarter. We will then be happy to take questions. For the second quarter, Credo reported revenue of $44 million and non-GAAP gross margin of 59.9%. Our Q2 results and our future growth expectations are driven by the accelerating market opportunity for highspeed and energy-efficient connectivity solutions. We target port speeds up to 1.6 terabits per second with solutions including Active Electrical Cables or AECs, optical DSPs, laser drivers and TIAs, Line Card PHYs, SerDes Chiplets, and SerDes IP licensing, enabling us to address a broad spectrum of connectivity needs throughout the digital infrastructure market.

Each of these solutions leverage our core SerDes technology and our unique customer-focus design approach. As a result, Credo delivers application-specific, highspeed solutions with optimized energy efficiency and system costs and our advantage expands as the market moves to 100-gig per lane speeds. Within the data center market today, we've seen a dramatically increasing demand for higher bandwidth, higher density, and more energy-efficient networking. This demand is driven by the proliferation of generative AI applications. For the past several years Credo has been collaborating with our customers on leading-edge AI platforms that are now in various stages of ramping production. In fact, the majority of Credo revenue will be driven by AI applications in the foreseeable future.

Now, I will review our overall business in more detail. First, I'll discuss our optical business. I am pleased with the traction we've been gaining in this market. In the quarter, we continued shipping to multiple global hyperscaler end customers, and we are making progress in positioning Credo to add additional hyperscale and customers in the upcoming quarters, targeting 400-gig and 800-gig applications. Credo also has optical designs in various stages with module customers and networking OEMs for the fiber channel market, and with service providers for 5G infrastructure deployments. Credo plays a disruptive role in optical DSP market. Our fundamental SerDes technology is leveraged to provide a compelling combination of performance, energy efficiency, and system cost.

Additionally, we focus on solving our customers problems and market challenges through engineering innovation. At the OFC Optical Conference in March of this year, there was an important call to action to address the unsustainable power and cost increases for optical modules in the 800-gig and 1.6T generations. Much industry discussion has ensued this year, especially related to the plausibility of the Linear Pluggable Optics architecture or LPO, also sometimes referred to as Linear Direct Drive. The LPO architecture is based on eliminating all optical DSP functionality. The industry has widely concluded that the LPO architecture will not be feasible for a material percentage of the optical module market, and that DSP functionality is critical to maintaining industry standards and interoperability, as well as achieving the bit error rate performance necessary for high yields in volume production.

However, this does not mean that the industry call to action will be unanswered. Credo's response following OFC was to look at innovative ways to drastically reduce DSP power and subsequently cost through architectural innovation. Today, Credo issued a press release introducing our Linear Receive Optical or LRO DSPs. Our LRO DSP products provide optimized DSP capability in the optical transmit path-only, and eliminate the DSP functionality in the optical receive path. This innovative architecture, as optimized by Credo, effectively reduces the optical DSP power by up to 50%, and at the same time lowers cost by eliminating unneeded circuitry. Our LRO products address the pitfalls of the LPO architecture by maintaining standards and enabling interoperability among many components of an optical system.

And the DSP functionality maintains the equalization performance that's critical to high yields and volume production. We've already shipped our Dove 850 800-gig LRO DSP device and evaluation boards to our lead optical and hyperscale end customers for their development and testing. While any revenue ramp will be a ways out, I view this innovation as the latest example of Credo pioneering a new product category that directly addresses the energy and system cost challenges faced by the Hyperscalers, especially for AI deployments. Regarding our AEC solutions, Credo continues to be an AEC market leader. While our initial success in our AEC business has been connecting front-end data center networks for general compute and AI appliances, we have seen an expansion in our AEC opportunity in the backend networks that are fundamental to AI cluster deployments.

Due to the sheer bandwidth required by backend networks, an acceleration in single lane speeds and networking density is driving the need for AECs, given the significant benefits compared to both passive copper cables and to active optical cables or AOCs for in-rack connectivity. We continue to make progress with our first two hyperscale customers for both front-end and back-end networks, and we're especially encouraged to see Credo AECS prominently featured in the leading-edge deployments introduced at their respective conferences in November. Years in the making, we continue to maintain strong and close working relationships with our customers, and I'm pleased to say that in Q2, we made our initial shipments of 800-gig production AECs, an industry first, and again we've demonstrated our market leadership.

An engineer in a cleanroom testing and tweaking an integrated circuit.
An engineer in a cleanroom testing and tweaking an integrated circuit.

We also continue to expand our hyperscale with customer base, with one in [indiscernible] with 400-gig AEC solutions and another in development with 800-gig AEC solutions. Additionally, we've seen the increased need for 400-gig and 800-gig AECs among Tier 2 data center operators and service providers. As a group, these customers contribute meaningful revenue to Credo. I'll also highlight one of Credo's announcements at the recent Open Compute Conference in October. Credo announced the P3, pluggable patch panel system, a multi-tool that enables service providers and hyperscalers, the freedom by using the P3 and AECs to decouple pluggable optics from core switching and routing hardware. The combination of the P3 and AECs enables network architects to optimize for power distribution and system cost, as well as to bridge varying speeds between switching and optical ports.

We're engaged with several customers and believe the efforts will result in meaningful revenue in the future. To sum up, we remain confident that the increasing demand for greater networking bandwidth driven by AI applications, combined with the extraordinary value proposition of our AEC solutions, will drive continued AEC market expansion. Now, regarding our Line Card PHY business, Credo is an established market leader with our Line Card PHY solutions, which include retimers, gearboxes, and MACsec PHYs for data encryption. Our overall value proposition becomes even more compelling as the market is now accelerating to 100-gig per lane deployments. According to our customer base, Credo's competitive advantage in this market segment derives from the common thread across all of our product lines, which is leading performance in signal integrity that is, optimized for energy efficiency and system cost.

We're building momentum and winning design commitments for our Screaming Eagle 1.6T PHYs and for our customer-sponsored next-generation 1.6T MACsec PHY. We remain excited about the prospects for this business with networking OEMs and hyperscale customers. Regarding our SerDes IP licensing and SerDes Chiplet businesses, credo's SerDes IP licensing business remains a strategically important part of our business. We have a complete portfolio of SerDes IP solutions that span a range of speeds, reach distances and applications with process nodes from 28 nanometer to 4 nanometer, and our initial 3 nanometer SerDes IP for 112-gig and 224-gig is in Fab now. During Q2, we secured several licensing wins across networking data center applications. Our wins include new and recurring customers, a testament to our team's execution in contributing to our customer's success.

We're also enthusiastic about the prospects for our chiplet solutions. During Q2, we secured a next-generation, 112-gig, 4 nanometer SerDes Chiplet win that includes customer sponsorship. Credo is aligned with industry expectations that chiplets will play an important role in the highest-performance designs in the future. In conclusion, Credo delivered strong fiscal Q2 results. We remain enthusiastic about our business given the market demand for dramatically increasing bandwidth. This plays directly to Credo's strengths, and we're one of the few companies that can provide the necessary breadth of connectivity solutions at the highest speeds, while also optimizing for energy efficiency and system cost. As we embark on second half of fiscal 2024, we expect continued growth that supports a more diversified customer base across a diversified range of connectivity solutions.

Lastly, I'm pleased to announce that, yesterday, Credo published our first ESG report, which can be found on our website. As reiterated several times today in my comments energy efficiency is built into our DNA and is a key part of our report. We aspire to be leaders across the ESG spectrum, and we strive to help enable our customers to be leaders as well. I'm very pleased with how Credo is pursuing our goals, and we look forward to continuing our positive ESG efforts. At this time, Dan Fleming, our CFO, will provide additional financial details. Thank you.

Dan Fleming: Thank you, Bill, and good afternoon. I will first review our Q2 results and then discuss our outlook for Q3 of fiscal 2024. As a reminder, the following financials will be discussed on a non-GAAP basis unless otherwise noted. In Q2, we reported revenue of $44 million, up 25% sequentially and down 14% year-over-year. Our IP business generated $7.4 million of revenue in Q2, up 165% sequentially and up 125% year-over-year. IP remains a strategic part of our business, but as a reminder, our IP results may vary from quarter-to-quarter, driven largely by specific deliverables to pre-existing or new contracts. While the mix of IP and product revenue will vary in any given quarter over time, our revenue mix in Q2 was 17% IP, above our long-term expectation for IP, which is 10% to 15% of revenue.

We expect IP as a percentage of revenue to be within our long-term expectations for fiscal 2024. Our product business generated $36.7 million of revenue in Q2, up 13% sequentially and down 24% year-over-year. Our top three end customers were each greater than 10% of our revenue in Q2. In fact, our top four end customers each represented a different product line, which illustrates the increasing diversity of our revenue base. Our team delivered Q2 gross margin of 59.9% at the high end of our guidance range and up 10 basis points sequentially. Our IP gross margin generally hovers near 100% and was 95.6% in Q2. Our product gross margin was 52.7% in the quarter, down 405 basis points sequentially due to product mix and some minor inventory-related items, and up 39 basis points year-over-year.

Total operating expenses in the second quarter were $27.1 million at the low end of our guidance range, down 1% sequentially and up 9% year-over-year. Our year-over-year OpEx increase was a result of an 11% increase in R&D as we continued to invest in the resources to deliver innovative solutions. Our SG&A was up 5% year-over-year. Our operating loss was $731,000 in Q2 compared to operating income of $3.2 million a year ago. The second quarter operating loss represented a sequential improvement of $5.7 million. Our operating margin was negative 1.7% in the quarter compared to positive 6.1% last year, due to reduced top-line leverage. We reported net income of $1.2 million in Q2, compared to net income of $2.2 million last year. Cash flow from operations in the second quarter was $5 million, an increase of $3.3 million year-over-year, due largely to a net reduction of inventory of $5 million in the quarter.

CapEx was $2 million in the quarter, driven by R&D equipment spending and free cash flow was $3 million, an increase of $6.9 million year-over-year. We ended the quarter with cash and equivalents of $240.5 million, an increase of $2.9 million from the first quarter. We remain well capitalized to continue investing in our growth opportunities while maintaining a substantial cash buffer. Our accounts receivable balance increased 17% sequentially to $32.7 million, while day sales outstanding decreased to 68 days, down from 73 days in Q1. Our Q2 ending inventory was $35.8 million, down $5 million sequentially. Now, turning to our guidance, we currently expect revenue in Q3 of fiscal 2024 to be between $51 million and $53 million, up 18% sequentially at the midpoint.

We expect Q3 gross margin to be within a range of 59% to 61%. We expect Q3 operating expenses to be between $28 million and $30 million. And we expect Q3 diluted weighted average share count to be approximately 166 million shares. We are pleased to see fiscal year 2024 continue to play out as expected. While we see some near term upside to our prior expectations, the rapid shift to AI workloads has driven new and broad based customer engagement. We expect that this rapid shift will enable us to diversify our revenue throughout fiscal year 2024 and beyond, as Bill alluded to. However, as new programs at new and existing customers ramp, we remain conservative with regard to the upcoming quarters, as we continue to gain better visibility into forecasts at our ramping customers.

In summary, as we move forward through fiscal year 2024, we expect sequential revenue growth, expanding gross margins due to increasing scale and improving product mix, and modest sequential growth in operating expenses. As a result, we look forward to driving operating leverage in the coming quarters. And with that, I will open it up for questions.

See also 20 States With Highest Migrant Workers in the US and 15 Most Expensive Cities To Heat A Home In Winter.

To continue reading the Q&A session, please click here.