Advertisement
UK markets close in 5 hours 24 minutes
  • FTSE 100

    7,847.96
    -117.57 (-1.48%)
     
  • FTSE 250

    19,407.74
    -291.15 (-1.48%)
     
  • AIM

    741.31
    -8.97 (-1.20%)
     
  • GBP/EUR

    1.1715
    +0.0004 (+0.04%)
     
  • GBP/USD

    1.2454
    +0.0008 (+0.06%)
     
  • Bitcoin GBP

    50,807.93
    -2,689.46 (-5.03%)
     
  • CMC Crypto 200

    885.54
    0.00 (0.00%)
     
  • S&P 500

    5,061.82
    -61.59 (-1.20%)
     
  • DOW

    37,735.11
    -248.13 (-0.65%)
     
  • CRUDE OIL

    85.09
    -0.32 (-0.37%)
     
  • GOLD FUTURES

    2,387.70
    +4.70 (+0.20%)
     
  • NIKKEI 225

    38,471.20
    -761.60 (-1.94%)
     
  • HANG SENG

    16,248.97
    -351.49 (-2.12%)
     
  • DAX

    17,772.17
    -254.41 (-1.41%)
     
  • CAC 40

    7,939.50
    -105.61 (-1.31%)
     

The EUROGLIDER autonomous electric glider project, led by AEDEVV, Dassault Aviation and the ISAE Group and supported by GIFAS, is ready for takeoff

Please find here attached the press release issued after the presentation of the Euroglider to the press today, Thursday May 27, at the Ecole de l’Air (Salon-de-Provence, France).

Press Release
May 27th, 2021

The EUROGLIDER autonomous electric glider project,
led by AEDEVV, Dassault Aviation and the ISAE Group
and supported by GIFAS, is ready for takeoff

The result of an innovative partnership launched at the end of 2014, involving the European Gliding Development Association (AEDEVV), Dassault Aviation and the engineering schools of the ISAE Group, the EUROGLIDER project aims to develop an electrically powered two-seater glider for teaching, release and training. As part of the energy transition trend in the aviation sector, EUROGLIDER addresses three issues: operational, environmental and economic. At the focal point of several technological challenges, the project is currently in the experimental test bench phase (ground + flight) and will soon begin preparations for the industrial phase. The ambition of this glider is to be able to carry out complete instruction flights autonomously without having to wait for favorable atmospheric conditions and with full respect for the environment.

Developing the gliding sector in Europe

The EUROGLIDER project aims to meet the needs expressed by European gliding training centers. An ecological activity by its very nature, gliding nonetheless requires favorable atmospheric conditions to achieve the altitude necessary to perform training flights. Because waiting periods can sometimes be prolonged, nearly 2/3 of newly registered pilots give up before their first solo flight. Thanks to its electric propulsion, the EUROGLIDER will be able to perform a series of several training flights of more than 40 minutes autonomously and without waiting for favorable conditions. It will allow training organizations to multiply by 2 to 3 times the number of training flights per year while reducing the learning period for students.

ADVERTISEMENT

Improved operating conditions for flying clubs

Thanks to its autonomous takeoff capability, the EUROGLIDER will reduce takeoff costs by 60 to 70% compared to the use of a conventional tow aircraft. Moreover, it will allow flying clubs to better distribute gliding activity by operating the glider throughout the year, depending less on atmospheric conditions. Training centers will be able to ensure a return on their investments but also to better optimize human resources, whether they are professionals or volunteers.

Reducing aviation’s climate footprint

The EUROGLIDER project falls within the scope of the Clean Sky 2 program launched by the European Commission, which aims to achieve industrial implementation of new environment-friendly technologies. With its autonomous takeoff thanks to its decarbonized electric propulsion, i.e. without the help of conventional tow aircraft, the EUROGLIDER will reduce the total take-off weight by 50%. It will also eliminate sources of noise pollution for people living near airfields.

Innovating to overcome construction and design challenges

The EUROGLIDER meets several technological challenges:

> An energy challenge: to allow an aircraft weighing more than 600 kg to perform a series of flight lessons lasting 40 to 50 minutes with multiple climbs above 1,300 meters without updrafts, thanks to optimized on-board energy density.
> A construction challenge to meet limits on weight and wing loading: to design a high-performance EASA-certified aerostructure, while reducing the weight of the airframe compared to equivalent non-powered conventional training gliders, and ensuring compatible, controlled production and acquisition costs.
> A challenge in the overall design for operational use: to allow simple and reliable operation, reproducing all the characteristics and handling qualities as well as the ergonomics of conventional training gliders for student pilots and instructors; to integrate new innovative and efficient training methods and tools; to facilitate maintenance.

The stages of the project



Until 2018



Design studies in response to user and market expectations



2019-2021



Experimental phases using ground + flight test benches and preparation of the industrial phase: test benches (flight + ground); confirmation of aerostructure and energy-propulsion systems; confirmation of flight missions; early specifications for industrial phase



2022-2024



Development engineering and EUROGLIDER industrial consortium

2019-2021: the intermediate stage of the Experimental Test Bed demonstrator at the École de l'Air

The objectives of the operating concept of the EUROGLIDER and its flight missions called for design innovations leading to architectural configurations that were unprecedented for a glider. An experimental test bench was therefore developed and flights were carried out by a test pilot according to two series of programs filed with the French civil aviation authority (DGAC), with the support and resources of the French Air and Space Force military school, École de l’Air, on Air Force Base 701 in Salon-de-Provence, under an agreement established with the Air and Space Force Staff.

The results obtained, first with towed flight launches, then with takeoffs and autonomous climbs using on-board electrical energy, were perfectly nominal with regard to the initial objectives in terms of maneuverability, pilot control and performance. They validate the relevance of the operating concept as well as the technical configurations chosen for the EUROGLIDER, and provide technical data for the engineering work for the industrial development phase to come.

This project is supported by GIFAS.

Pictures of the project for the media are available at: https://www.ecole-air-espace.fr/euroglider-espace-presse-du-27-mai-2021/



Media contacts
OXYGEN Agency

Juliette Vienot
juliette.v@oxygen-rp.com
+33 (0)5 32 11 07 36

Charline Kohler
charlinek@oxygen-rp.com
+33 (0)5 32 11 07 32

About the ISAE Group
The ISAE Group brings together schools in the field of aerospace engineering under a common banner. It aims to meet the needs of the aerospace sector by offering a wide range of training programs dedicated to the field (engineers, masters, specialized masters and doctorates); to constitute a quality guarantee for these programs; and to develop joint projects between its members. With five schools, some 30 training programs and more than 1,600 graduates per year, the ISAE Group offers the aerospace industry a range of high-level scientific and technical graduates that is unique in Europe. The ISAE Group's schools are present in France in all the major aeronautical and space regions with ISAE-SUPAERO (Occitanie-Toulouse), ISAE-ENSMA (Nouvelle Aquitaine - Poitiers), ISAE-SUPMÉCA (Ile de France - Saint-Ouen), ESTACA (Ile-de-France - Saint-Quentin-en-Yvelines and Pays de la Loire - Laval) and École de l’Air (Provence-Alpes-Côte d’Azur - Salon-de-Provence). In 2020, ESTIA (Nouvelle Aquitaine - Bidart, EIGSI (Nouvelle Aquitaine - La Rochelle) and Elisa Aerospace (Hauts-de-France and Nouvelle Aquitaine - Saint-Quentin and Saint-Jean D’Illac) became partner schools. The Euroglider project allows the ISAE Group to participate with its teacher-researchers and students in the design and implementation of an innovative, ambitious, realistic and meaningful project.

About the AEDEVV
The European Gliding Development Association (AEDEVV) aims to generate and support projects to develop gliding activity and practice in France and Europe. It also develops related national and European activities relating to the aeronautical world in all its sporting, educational, technical, industrial, environmental and societal dimensions. The Euroglider project was born from the reflections of French and European glider pilots who were concerned about providing concrete answers to the time constraints and financial issues with respect to glider training, and the reduction of its environmental footprint.

About Dassault Aviation
With over 10,000 military and civil aircraft (including 2,500 Falcons) delivered in more than 90 countries over the last century, Dassault Aviation has built up expertise recognized worldwide in the design, development, sale and support of all types of aircraft, ranging from the Rafale fighter, to the high-end Falcon family of business jets, military drones and space systems. The Euroglider project is fully in line with Dassault Aviation's overall policy of cooperation with the education sector. The company is supporting the students of the ISAE Group in this ambitious and realistic aeronautical project, with problems close to those encountered by its engineers.

Veuillez trouver ci-joint le communiqué diffusé à l’issue de la présentation de l’Euroglider à la presse ce jour (jeudi 27 mai) sur le site de l’Ecole de l’Air (Salon-de-Provence).

Attachment