UK Markets close in 7 hrs 47 mins
  • FTSE 100

    -15.62 (-0.27%)
  • FTSE 250

    -65.40 (-0.37%)
  • AIM

    -2.30 (-0.24%)

    -0.0007 (-0.07%)

    -0.0006 (-0.0479%)

    +559.99 (+6.56%)
  • CMC Crypto 200

    +5.48 (+2.34%)
  • S&P 500

    -56.89 (-1.63%)
  • DOW

    -410.89 (-1.44%)

    -0.07 (-0.17%)

    -7.90 (-0.41%)
  • NIKKEI 225

    -104.09 (-0.44%)

    +6.85 (+0.03%)
  • DAX

    -77.71 (-0.60%)
  • CAC 40

    -26.98 (-0.55%)

Global Thin Film Deposition Markets 2020: Technology Trends, Products, Applications, and Suppliers

Research and Markets
·4-min read

Dublin, Oct. 13, 2020 (GLOBE NEWSWIRE) -- The "Thin Film Deposition: Trends, Key Issues, Market Analysis" report from The Information Network has been added to's offering.

This report discusses the technology trends, products, applications, and suppliers of deposition materials and equipment. It also gives insights to suppliers for future user needs and should assist them in long range planning, new product development and product improvement. Market shares and a market forecast for each sector of thin film deposition tools is presented.

CVD (Chemical Vapor Deposition) is used to deposit materials in various forms, including monocrystalline, polycrystalline, amorphous, and epitaxial. By subtypes, there are mainly LPCVD (low pressure), PECVD (plasma enhanced), and ALD. PVD deposition techniques include sputtering and eBeam and thermal evaporation.

The CVD process involves mixing the source material with one or more volatile precursors using a plasma to chemically interact and breakdown the source material. The processes use heat with higher pressures leading to a more reproducible film where the film thicknesses could be managed by time/power. These films are more stoichiometric, they are denser and are capable of growing higher quality insulator films. The PVD processing uses a solid precursor metal that is gasified through some electrical energy. The gasified atoms are then transferred to the substrate. These processes manages thicknesses using a quartz crystal rate monitor to control rate and thickness of the film.

ALD films are very conformal approaching 2000:1 aspect ratios, thus providing excellent step coverage over features. The process is repeatable and can grow thinner layers under 10nm thickness predictably. Films include Alumina oxide (AL2O3), Hafnium oxide (HfO2) and Titanium oxide (TiO2). Its use in the semiconductor industry has advanced ALD rapidly in recent years to develop thin, high-K gate dielectric layers.

The PECVD process offers good step coverage over features. Films include Silicon Dioxide (SiO2), Silicon Nitride (Si3N4) and lower stress Oxynitride (SiON) films. The PECVD films offer more flexibility than ALD with higher deposition rates leading to higher throughputs.

Key Topics Covered:

Chapter 1 Introduction

Chapter 2 Executive Summary

Chapter 3 Physical Vapor Deposition
3.1 Introduction
3.2 Sputtering Technology
3.3 Plasma Technology
3.4 Reactor Designs
3.4.1 Long-Throw Deposition
3.4.2 Collimated Sputter Deposition
3.4.3 Showerhead Deposition
3.4.4 Ionized PVD
3.5 Semiconductor Processing
3.6 Targets

Chapter 4 Chemical Vapor Deposition
4.1 Introduction
4.2 Chemical Vapor Deposition (CVD) Techniques
4.2.1 APCVD
4.2.2 LPCVD
4.2.3 PECVD
4.2.4 HDPCVD
4.2.5 ALD

Chapter 5 Electrochemical Deposition
5.1 Introduction
5.2 Reactor Design
5.3 Challenges
5.4 Additives
5.5 Processing
5.5.1 Superfilling
5.5.2 Aspect Ratios
5.6 Copper Cathodes
5.7 Wet Copper Seed-Layer

Chapter 6 Film Deposition And Film Properties
6.1 Introduction
6.2 Dielectric Deposition
6.2.1 Silicon Dioxide Thermal CVD PECVD HDPCVD
6.2.2 Silicon Nitride Thermal CVD PECVD HDPCVD
6.2.3 High-K Dielectrics
6.2.4 Low-K Dielectrics
6.3 Metal Deposition
6.3.1 Aluminum
6.3.2 Tungsten/Tungsten Silicide
6.3.3 Titanium Nitride

Chapter 7 Vendor Issues
7.1 Introduction
7.2 450mm Processing
7.3 Integrated Processing
7.4 Copper
7.5 Metrology
7.6 ESD
7.7 Parametric Test

Chapter 8 Market Forecast
8.1 Introduction
8.2 Key Issues
8.2.1 Interconnect Architectures Logic (MPU/ASIC) Memory (Flash)
8.2.2 Processing Trends Dielectric Film Trends Barrier Film Trends Conductor Film Trends
8.2.3 Through-Si-Via (TSV), 3d Stacking Technology Introduction Through Si Via Technologies
8.2.4 Emerging Interconnect Solutions Overview Cu Replacements
8.3 Market Forecast Assumptions
8.4 Market Forecast
8.4.1 Chemical Vapor Deposition
8.4.2 Physical Vapor Deposition
8.4.3 Copper Electroplating Market
8.4.4 Atomic Layer Deposition Market

For more information about this report visit

Source: The Information Network

Research and Markets also offers Custom Research services providing focused, comprehensive and tailored research.

CONTACT: CONTACT: Laura Wood, Senior Press Manager For E.S.T Office Hours Call 1-917-300-0470 For U.S./CAN Toll Free Call 1-800-526-8630 For GMT Office Hours Call +353-1-416-8900