UK markets close in 1 hour 17 minutes
  • FTSE 100

    6,987.52
    -65.10 (-0.92%)
     
  • FTSE 250

    17,593.79
    +31.37 (+0.18%)
     
  • AIM

    815.72
    +0.28 (+0.03%)
     
  • GBP/EUR

    1.1416
    -0.0035 (-0.31%)
     
  • GBP/USD

    1.1220
    -0.0101 (-0.89%)
     
  • BTC-GBP

    17,824.74
    +36.14 (+0.20%)
     
  • CMC Crypto 200

    455.39
    -7.73 (-1.67%)
     
  • S&P 500

    3,754.52
    -28.76 (-0.76%)
     
  • DOW

    30,034.25
    -239.62 (-0.79%)
     
  • CRUDE OIL

    87.98
    +0.22 (+0.25%)
     
  • GOLD FUTURES

    1,720.20
    -0.60 (-0.03%)
     
  • NIKKEI 225

    27,311.30
    +190.77 (+0.70%)
     
  • HANG SENG

    18,012.15
    -75.82 (-0.42%)
     
  • DAX

    12,504.57
    -12.61 (-0.10%)
     
  • CAC 40

    5,951.10
    -34.36 (-0.57%)
     

Nordex SE: New rotor for the energy transition: Nordex Group presents the N175/6.X

·4-min read

DGAP-News: Nordex SE / Key word(s): Product Launch
Nordex SE: New rotor for the energy transition: Nordex Group presents the N175/6.X
15.09.2022 / 07:30 CET/CEST
The issuer is solely responsible for the content of this announcement.

  • Wind turbine for medium and low-wind locations based on the proven Delta4000

Hamburg, 15 September 2022. In order to be able to better meet the increasing demand for wind turbines expected by its customers in the coming years, the Nordex Group is expanding its turbine fleet with another highly efficient turbine of the Delta4000 series: the N175/6.X.

The new turbine uses the proven technical concepts of the Delta4000 series, such as the control system, the flexible rated power and large parts of the nacelle of the sister model, the N163/6.X, which has already been tested in the field. As a result, in addition to the highly efficient development process, already tested and existing suppliers and production capacities can also be used for the new turbine.

With its single-piece, newly designed 85.7-meter-long rotor blade, the N175/6.X achieves an above-average capacity factor. At typical low to medium-wind locations, the N175/6.X will achieve between 7 - 14 percent more yield compared to its predecessor models, the N163/5.X and N163/6.X. Due to the turbine’s larger rotor, this additional yield is achieved particularly during times of light wind speeds where the turbine produces up to 22 percent more energy than its predecessors. This is advantageous for operators, as electricity prices are usually higher during low-wind periods and the N175/6.X ensures high electricity production already at low wind speeds.

The N175/6.X will initially be offered with hub heights of between 112 and 179 meters, which enables the turbine to reach attractive wind speeds even in locations with typically light winds. The turbine is designed for an operating lifetime of 25 years, but in some site-specific circumstances can also be confirmed for up to 35. At a rated output of 6.22 MW, the maximum sound emission is 106 dB(A).

Nordex also offers a wide range of options for the N175/6.X in order to meet the diverse economic and permit requirements. Among other things, the turbine can be equipped with a bat module and on-de­mand night-time mark­ing. In addition, and, like the other turbines of the Delta4000 series, it offers different operating modes for reduced sound emissions.  A cold climate variant ensuring operation in environments of -30°C is also available.

The N175/6.X will be available worldwide, but Nordex expects the main demand to be in Europe, especially at the beginning of series production.

José Luis Blanco, CEO of the Nordex Group: "The global energy transition cannot succeed without onshore wind power. With its proven product range, the Nordex Group has been ideally positioned for years to provide the necessary technology for this. With today's introduction of the N175/6.X, we are making a further contribution to advancing the energy transition in the world and making new wind farm locations economically attractive."

It was only in May 2022 that the Nordex Group installed its world's first 6 MW N163/6.X turbine of the Delta4000 series as planned. Scheduled series production of the N175/6.X is scheduled for the end of 2024. Among other things, the nacelle will be produced at the company’s German production facility in Rostock.

Nordex Group at WindEnergy Hamburg: Hall B6, Stand No. B6.346

The Nordex Group - a profile
The Group has installed more than 41 GW of wind energy capacity in over 40 markets, and in 2021, generated revenues of EUR 5.4 billion. The company currently employs a workforce of approx. 9,000. The company’s joint manufacturing capacity includes factories in Germany, Spain, Brazil, the United States, India and Mexico. The product portfolio is focused on onshore turbines in the 4 to 6.X MW class, which are tailor-made for the market requirements of countries with limited space and regions with limited grid capacity.

Contact person for press:
Nordex SE
Felix Losada
Phone: +49 (40)30030-1141
flosada@nordex-online.com

Contact for investors:
Nordex SE
Felix Zander
Phone: +49 (0) 152 0902 4029
fzander@nordex-online.com

 

 

 

 


15.09.2022 CET/CEST Dissemination of a Corporate News, transmitted by DGAP - a service of EQS Group AG.
The issuer is solely responsible for the content of this announcement.

The DGAP Distribution Services include Regulatory Announcements, Financial/Corporate News and Press Releases.
Archive at www.dgap.de

Language:

English

Company:

Nordex SE

Erich-Schlesinger-Straße 50

18059 Rostock

Germany

Phone:

+49 381 6663 3300

Fax:

+49 381 6663 3339

E-mail:

info@nordex-online.com

Internet:

www.nordex-online.com

ISIN:

DE000A0D6554

WKN:

A0D655

Listed:

Regulated Market in Frankfurt (Prime Standard); Regulated Unofficial Market in Berlin, Dusseldorf, Hamburg, Hanover, Munich, Stuttgart, Tradegate Exchange

EQS News ID:

1442569


 

End of News

DGAP News Service

show this
show this