UK markets open in 6 hours 23 minutes
  • NIKKEI 225

    28,831.27
    +88.02 (+0.31%)
     
  • HANG SENG

    28,665.26
    +124.43 (+0.44%)
     
  • CRUDE OIL

    65.22
    +0.17 (+0.26%)
     
  • GOLD FUTURES

    1,679.10
    +1.10 (+0.07%)
     
  • DOW

    31,802.44
    +306.14 (+0.97%)
     
  • BTC-GBP

    38,518.12
    +987.07 (+2.63%)
     
  • CMC Crypto 200

    1,076.45
    +52.24 (+5.10%)
     
  • ^IXIC

    12,609.16
    -310.99 (-2.41%)
     
  • ^FTAS

    3,820.19
    +48.46 (+1.28%)
     

Roskill: China closing small ferrochrome furnaces

Roskill Information Services Ltd
·3-min read

Under the guidance of China’s 14th five-year plan (2021-2025), officials in Inner Mongolia have started to impose several measures to develop a ‘greener’ Chinese ferroalloy and steel industry. To ensure that the energy consumption per unit of GDP will decrease by 3.4% in 2021, an electricity policy to cut supply was issued by Wulanchabu Industrial and Information Technology bureau on 10 January, followed by the Fengzhen government issuing an updated notice for its ferrochrome industry on 23 January to control energy consumption.

London: UK, Jan. 28, 2021 (GLOBE NEWSWIRE) -- The resultant furnace regulations include:

  • All furnaces below 25MVA must be shut down. Producers who produce noble alloys, will have their product reviewed by end-February and be allowed to operate if the required qualifications are met.

  • Only one open or semi-closed furnace above 25MVA can be put into operation by operators, while the rest of the furnaces must be shut down. All open and semi-closed furnaces are required to complete the technological upgrading to closed furnaces, and only qualified furnaces can come back online after they are examined by the government before the end of February.

  • All furnaces, regardless of size, will be examined according to the energy consumption indicators from Bureau of Statistics at the end of February. Those not meeting the required qualifications will be forced to shut down.

Fengzhen is one of the core areas in Ulanqab, Inner Mongolia, for producing high-carbon ferrochrome (HC FeCr) in China, with the total capacity accounting for around 30% of Inner Mongolia and 15% of the country. However, nearly half of the area’s furnaces are below 25MVA.

At this point, it is not clear if and when this regulation will filter through into the other key ferroalloy producing regions, but for now it is in line with China’s 14th five-year plan (2021-2025) which outlines:

  • Replacing high-speed growth with high-quality growth.

  • Rebalancing its economy with supply-side structural reform.

  • Driving modernization through innovation and technological advancements.

  • Promoting high-end, intelligent, and green production.

Structural reforms of smelting furnaces in China have generally moved in tandem with the development of larger, cleaner furnaces. These furnaces also operate at higher efficiency rates and therefore inevitably lead to a net increase in operational capacity.

The closure of small and non-closed ferrochrome furnaces in China has already been ongoing, but the decision to close all furnaces up to 25MVA has caught many in the industry off-guard, as the expected closures were thought to coincide with the development of new capacity. Naturally, the immediate closure drives a short-term tightness in supply and producers outside of China will look for opportunities to fill the gap. Roskill's new Chromium Cost Model Service allows users to instantly model the impacts of ore taxes, supply volumes and other macroeconomic factors on the structure of the ore and alloy industry.

All furnaces below 25MVA across China account for about two-thirds of total installed capacity, although this is significantly lower when comparing operational capacity. Nevertheless, available furnaces larger than 25MVA are theoretically capable of accounting for the equivalent volume of China’s total 2019 output level. Therefore, any growth in FeCr supply in China will be underpinned by expansion projects of larger furnaces.

The stainless steel industry is on track for a strong recovery in 2021 following the impacts of COVID-19. Roskill forecasts continued healthy growth over the 2020s that will underpin raw material demand, especially for chromium and nickel. Roskill’s new Steel Alloys 1st Edition report provides the latest market analysis and forecasts for key bulk, base and noble alloys consumed by the steel industry, including chromium and nickel. In addition, there is a move globally to impose “greener” regulations on the ferroalloy and steel industry, which together with the reduction in excess old capacity in China will add pressure on producers and emphasise the importance of their cost competitiveness to meet demand within a sustainable guidance.

CONTACT: Nils Backeberg Roskill Information Services Ltd +44 (0)20 8417 0087 nils@roskill.com Tong Tong Roskill Information Services Ltd +44 (0)20 8417 0087 tong@roskill.com