UK Markets closed

Worldwide Gaskets and Seals Industry to 2026 - Key Players Include ElringKlinger, Flowserve and Daetwyler Holding Among Others

·7-min read

Dublin, July 12, 2021 (GLOBE NEWSWIRE) -- The "Gaskets and Seals Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2021-2026" report has been added to ResearchAndMarkets.com's offering.

The global gaskets and seals market reached a value of US$ 57.2 Billion in 2020. Looking forward, the publisher expects the market to exhibit moderate growth during 2021-2026. Keeping in mind the uncertainties of COVID-19, we are continuously tracking and evaluating the direct as well as the indirect influence of the pandemic on different end use industries. These insights are included in the report as a major market contributor.

Gaskets and seals are mechanical fixtures that are used to prevent leakage of fluid between two components and admission of debris in engines. Gaskets act as a static seal between two non-mobile flat flanges. They are manufactured using materials that can handle high rates of compression such as rubber, nitrite, graphite and neoprene. On the other hand, seals are placed to prevent leakages from two moving parts such as shafts, pumps and engine components. They are usually flat and round and manufactured with an inner rubber surface and an outer metal ring. They are primarily used to seal the hydraulic line to prevent leakage from the shaft end. Both gaskets and seals offer high flexibility, reliability, strength and resistance to extreme heat.

The thriving automotive industry, along with the increasing product utilization in the plumbing and construction sector, represent the key factors driving the market growth. Owing to rising industrialization and rapid urbanization across the globe, there is a significant increase in the number of manufacturing plants and factories that use gaskets and seals. The automotive industry extensively utilizes the products to avoid the leakage or spillage of fluids and gases. Furthermore, gaskets are used in engines to maintain pressure and prevent contaminated particles from permeating, whereas seals are used as shock absorbers. They can also sustain extreme pressures, compressive loads and temperature variations due to which they are used in various sealing machines and equipment in the manufacturing sector. Moreover, the growth of the e-commerce platform that provides direct and third-party operated distribution channels to the manufacturers is also contributing to the market growth.

Report Coverage:

  • Historical, Current and Future Market Trends

Market Breakup by Product:

  • Gaskets

  • Metallic Gasket

  • Rubber Gasket

  • Cork Gasket

  • Non-Asbestos Gasket

  • Spiral Wound Gasket

  • Seals

  • Shaft Seals

  • Molded Seals

  • Motor Vehicle Body Seals

  • Others

Market Breakup by Material:

  • Fiber

  • Graphite

  • PTFE

  • Rubber

  • Silicones

  • Others

Market Breakup by Application:

  • Automotive

  • Industrial Machinery

  • Electrical and Electronics

  • Marine & Rail

  • Aerospace

  • Oil & Gas

  • Chemicals & Petrochemicals

  • Others

Market Breakup by End-Use:

  • OEM

  • Aftermarket

Market Breakup by Region:

  • Asia Pacific

  • North America

  • Europe

  • Middle East and Africa

  • Latin America

Competitive Landscape:

The report has also analyzed the competitive landscape of the market with some of the key players being AB SKF, Dana Incorporated, ElringKlinger, Flowserve, Trelleborg, Freudenberg Sealing Technologies, Federal-Mogul, Smiths Group, BRUSS Sealing Systems, Cooper Standard Holding, Garlock Sealing Technologies, Daetwyler Holding, etc.

Key Questions Answered in This Report:

  • How has the global gaskets and seals market performed so far and how will it perform in the coming years?

  • What are the key regional markets in the global gaskets and seals industry?

  • What has been the impact of COVID-19 on the global gaskets and seals industry?

  • What is the breakup of the market based on the product?

  • What is the breakup of the market based on the material?

  • What is the breakup of the market based on the application?

  • What is the breakup of the market based on the end-use?

  • What are the various stages in the value chain of the global gaskets and seals industry?

  • What are the key driving factors and challenges in the global gaskets and seals industry?

  • What is the structure of the global gaskets and seals industry and who are the key players?

  • What is the degree of competition in the global gaskets and seals industry?

Key Topics Covered:

1 Preface

2 Scope and Methodology

3 Executive Summary

4 Introduction
4.1 Overview
4.2 Key Industry Trends

5 Global Gaskets and Seals Market
5.1 Market Overview
5.2 Market Performance
5.3 Impact of COVID-19
5.4 Market Breakup by Product
5.5 Market Breakup by Material
5.6 Market Breakup by Application
5.7 Market Breakup by End-Use
5.8 Market Breakup by Region
5.9 Market Forecast

6 Market Breakup by Product
6.1 Gaskets
6.1.1 Market Trends
6.1.2 Market Breakup by Type
6.1.2.1 Metallic Gasket
6.1.2.2 Rubber Gasket
6.1.2.3 Cork Gasket
6.1.2.4 Non-Asbestos Gasket
6.1.2.5 Spiral Wound Gasket
6.1.2.6 Others
6.1.3 Market Forecast
6.2 Seals
6.2.1 Market Trends
6.2.2 Market Breakup by Type
6.2.2.1 Shaft Seals
6.2.2.2 Molded Seals
6.2.2.3 Motor Vehicle Body Seals
6.2.2.4 Others
6.2.3 Market Forecast

7 Market Breakup by Material
7.1 Fiber
7.1.1 Market Trends
7.1.2 Market Forecast
7.2 Graphite
7.2.1 Market Trends
7.2.2 Market Forecast
7.3 PTFE
7.3.1 Market Trends
7.3.2 Market Forecast
7.4 Rubber
7.4.1 Market Trends
7.4.2 Market Forecast
7.5 Silicones
7.5.1 Market Trends
7.5.2 Market Forecast
7.6 Others
7.6.1 Market Trends
7.6.2 Market Forecast

8 Market Breakup by Application
8.1 Automotive
8.1.1 Market Trends
8.1.2 Market Forecast
8.2 Industrial Machinery
8.2.1 Market Trends
8.2.2 Market Forecast
8.3 Electrical and Electronics
8.3.1 Market Trends
8.3.2 Market Forecast
8.4 Marine & Rail
8.4.1 Market Trends
8.4.2 Market Forecast
8.5 Aerospace
8.5.1 Market Trends
8.5.2 Market Forecast
8.6 Oil & Gas
8.6.1 Market Trends
8.6.2 Market Forecast
8.7 Chemicals & Petrochemicals
8.7.1 Market Trends
8.7.2 Market Forecast
8.8 Others
8.8.1 Market Trends
8.8.2 Market Forecast

9 Market Breakup by End-Use
9.1 OEM
9.1.1 Market Trends
9.1.2 Market Forecast
9.2 Aftermarket
9.2.1 Market Trends
9.2.2 Market Forecast

10 Market Breakup by Region
10.1 Asia Pacific
10.1.1 Market Trends
10.1.2 Market Forecast
10.2 Europe
10.2.1 Market Trends
10.2.2 Market Forecast
10.3 North America
10.3.1 Market Trends
10.3.2 Market Forecast
10.4 Middle East and Africa
10.4.1 Market Trends
10.4.2 Market Forecast
10.5 Latin America
10.5.1 Market Trends
10.5.2 Market Forecast

11 SWOT Analysis

12 Value Chain Analysis

13 Porter's Five Forces Analysis

14 Competitive Landscape
14.1 Market Structure
14.2 Key Players
14.3 Profiles of Key Players
14.3.1 AB SKF
14.3.2 Dana Incorporated
14.3.3 ElringKlinger
14.3.4 Flowserve
14.3.5 Trelleborg
14.3.6 Freudenberg Sealing Technologies
14.3.7 Federal-Mogul
14.3.8 Smiths Group
14.3.9 BRUSS Sealing Systems
14.3.10 Cooper Standard Holding
14.3.11 Garlock Sealing Technologies
14.3.12 Daetwyler Holding

For more information about this report visit https://www.researchandmarkets.com/r/uh1o7

CONTACT: CONTACT: ResearchAndMarkets.com Laura Wood, Senior Press Manager press@researchandmarkets.com For E.S.T Office Hours Call 1-917-300-0470 For U.S./CAN Toll Free Call 1-800-526-8630 For GMT Office Hours Call +353-1-416-8900


Our goal is to create a safe and engaging place for users to connect over interests and passions. In order to improve our community experience, we are temporarily suspending article commenting